next »

[swifty]

hi guys

I cant find foam thick enought to construct my blank. so I need to glue a 1/2 in sheet to a 2 in sheet what glue can I use.  I am concerned that the glue in the centre will not dry as it is not exposed to oxegen. 

Keep well
Swifty

[Sparrow]

I've been using 2" foam sheets and they've been coming out fine, good enough paddle wise.
Overall thickness around 2 3/16  - 2 1/4 when finished with the 3mm skins on.
I wouldn't even worry about glueing the second sheet, but if you really want the extra thickness, the glue will dry fine because the air can get to the glue via the little air pockets in between the beads of EPS.